
I. Product Description
The outward-flanged trough-type cable tray is a high-strength, safe, and easy-to-install solution. Featuring an integrated design with outward-flanged, arc-shaped edges, it overcomes the drawbacks of the sharp, right-angled corners found in traditional cable trays. This design combines structural reinforcement, enhanced installation safety, a neat aesthetic, and cost-effective transport. Leveraging a specialized outward-flanged mechanical structure, the tray offers superior rigidity, impact resistance, and deformation resistance. Its smooth, rounded edges protect cables from abrasion, making it suitable for a wide range of applications—including civil, commercial, general industrial, and outdoor environments. It is a highly versatile, upgraded cable management solution that delivers exceptional overall value.
II. Key Advantages
Arc-Shaped Outward Flanges for Cable Protection: This upgraded trough-type cable tray features outward-flanged, arc-shaped side edges, eliminating sharp corners. During cable laying, pulling, or subsequent maintenance and reconfiguration, these edges prevent the cable insulation from being cut or abraded. This mitigates the risk of cable damage and electrical leakage at the source, significantly enhancing safety during both installation and long-term operation.
Reinforced Outward-Flanged Structure for Doubled Rigidity: The integrated, outward-flanged design ensures more uniform load distribution compared to standard trays with straight edges. It provides significantly higher structural rigidity, as well as greater resistance to deformation and impact. The tray effectively withstands external knocks and heavy loads, remaining stable and resistant to twisting, warping, or loosening over time—even in demanding industrial or outdoor environments.
Stackable Design for Reduced Transport Costs: The uniform, outward-flanged structure allows multiple trays to be stacked for storage and transport. This significantly reduces the space required for shipping, minimizes logistical volume, and lowers the risk of transit damage. Consequently, it effectively reduces transportation costs for large-scale projects, offering outstanding cost-performance value. Easy to install and aesthetically pleasing, ideal for high-standard projects: Featuring a precise structure with smooth edges and corners, these components ensure a seamless fit during installation without any burrs that could cause injury. Once installed, the cabling layout appears neat and uniform—perfect for projects that demand a high-quality, professional finish.
III. Applicable Scenarios
Suitable environments: Highly versatile, these components are ideal for a wide range of civil and commercial cabling applications, including office buildings, residential complexes, and commercial facilities. They are particularly well-suited for projects that require a polished appearance, involve frequent installation work, or necessitate regular ongoing maintenance. They are also appropriate for outdoor settings and standard industrial facilities where a certain level of structural strength and impact resistance is required for the cable tray system.
Unsuitable environments: Not intended for extreme industrial conditions—such as those involving heavy-duty loads, high-frequency intense vibrations, or severe corrosion. In such cases, specialized reinforced, heavy-duty, or high-strength, anti-corrosive cable tray systems are recommended.
IV. Structural Features
Integrated, rounded-flange design for maximum safety: The cable tray is formed through a single-process bending technique, creating a smooth, rounded, outward-facing flange. This eliminates sharp edges, preventing injuries to personnel and protecting cables from abrasion—an essential feature for environments requiring frequent installation or ongoing maintenance.
Outward-flanged structural design for superior deformation resistance: The outward-folded flange acts as a built-in structural reinforcement, significantly enhancing the lateral rigidity and overall load-bearing stability of the tray. It offers far greater resistance to impact and torsion than standard cable trays, ensuring superior structural durability.
Stackable design for efficient storage and transport: With standardized, uniform outward-flange dimensions, the units can be stacked efficiently. This minimizes space usage, streamlines logistics and on-site storage, and effectively reduces project-related storage and transportation costs.
Fully enclosed protection for secure and stable cabling: Building on the advantages of a closed-trough design, this system provides effective protection against dust, water, and debris. It fully shields the internal power and data cables, ensuring long-term, stable operation of the electrical and communication lines. V. Specifications
Industry-Standard Dimensions: These trough-type cable trays with external flanges utilize a standardized, widely adopted dimension system. With a comprehensive range of sizes and highly interchangeable accessories, they are suitable for the vast majority of civil, commercial, general industrial, and outdoor cabling projects, making selection and integration straightforward.
High-Precision Molded Construction: Formed using integrated molds, the external flanges and rounded transitions are shaped through precise bending. This ensures a flat surface, consistent dimensions, and high symmetry. The trays fit together tightly during on-site assembly, resulting in a clean, professional appearance that meets the acceptance standards for high-end interior fit-out projects.
VI. Selection Tips
1. These trough-type, externally flanged cable trays are high-strength, safe, and cost-effective solutions. They are an ideal choice for cabling in high-end commercial and residential fit-outs, general integrated power and low-voltage wiring, as well as standard industrial and outdoor installations.
2. For projects involving bulk procurement where transportation costs must be managed, this stackable, externally flanged design is the preferred choice, as it significantly reduces logistics expenses.
3. Depending on indoor or outdoor environmental requirements, the trays can be finished with protective coatings—such as powder coating or hot-dip galvanizing—to enhance weather resistance and rust protection, thereby extending the overall service life of the cable tray system.
| Item No. | C01A2-505G | Mounting | Floor / ceiling / wall |
| Product Description | Outward Flanged Trough Cable Tray | Walkable | No |
| Manufacturer | Tianjin Buerkafu International Trade Co., Ltd. | Cover | Yes |
| Coating | Zinc | Bottom mounting holes | Yes |
| Material | Steel | Anti-rust treatment | No |
| Finish | Pre-galvanized steel strip | Side perforations | Yes |
| Finish Standard | DIN EN 10346 | Load test class acc. to IEC 61537 | Class II |
| Connectors included | Yes | Connection method | Bolted |
| length(mm) | width(mm) | height(mm) | Plate thickness(mm) | Functional maintenance | color | Material | Coating | Product ID | Quantity | Operation |
|---|---|---|---|---|---|---|---|---|---|---|
| 3000 | 50 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 100 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 150 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 200 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 300 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 400 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 500 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 600 | 50 | 1.2 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 50 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 100 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 150 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 200 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 300 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 400 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 500 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 600 | 50 | 1.5 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 50 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 100 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 150 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 200 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 300 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 400 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 500 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
|
| 3000 | 600 | 50 | 2.0 | Trough-type cable tray, sealed | Zinc-Aluminum-Magnesium | Galvanized sheet | Hot-dip galvanizing | CO1A2-540G |
pcs
|
No documents in this category.