
Burkaf trough cable trays are roll-formed from continuously hot-dip galvanized steel strip into a solid-bottom channel with raised side walls, so the cable is supported along its entire length instead of resting on rungs or wires. The closed bottom shields the cable from dust, falling debris and accidental contact, which makes the trough profile the standard choice for power distribution runs and for installations where cable protection matters more than open ventilation.
The 50 x 50 x 3000 mm section with 1.2 mm wall thickness is built as a Class II cable support system tested to IEC 61537, and the steel strip is galvanized to DIN EN 10346. Side walls are slotted so cable ties and fixings can be passed through at any point, and pre-punched holes in the bottom allow the tray to be fixed to floor, ceiling or wall with standard supports.
Power and control cable routing in industrial plants, commercial buildings, data centers and infrastructure projects, both indoors and in covered outdoor installations.
Standard length 3000 mm, cross section 50 x 50 mm, wall thickness 1.2 mm. Splice connectors are included. Other sizes and finishes can be quoted on request.
| Item No. | C/PT1A2-505G | Mounting | Floor / ceiling / wall |
| Product Description | Trough Cable Tray | Walkable | No |
| Manufacturer | Tianjin Buerkafu International Trade Co., Ltd. | Cover | Yes |
| Coating | Zinc | Bottom mounting holes | Yes |
| Material | Steel | Anti-rust treatment | No |
| Finish | Pre-galvanized steel strip | Side perforations | Yes |
| Finish Standard | DIN EN 10346 | Load test class acc. to IEC 61537 | Class II |
| Connectors included | Yes | Connection method | Bolted |
No documents in this category.